RAM Tele-Pole with 4" & 7" Poles, Double Swing Arms & Round PlateSKU: RAM-VP-SW1-47
Or 4 interest-free payments of $53.74 with Learn more.
RAM 100mm & 178mm Tele-Pole Double Swing Arm Mount Kit
The RAM-VP-SW1-47 consists of a 178mm (7") lower female Tele-Pole, 100mm (4") upper male Tele-Pole, double swing arm and a 63.5mm (2.5") round base that contains the universal AMPS hole pattern.
The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post.
Once the knob has been tightened, the Tele-Pole becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount.
The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 305mm (12").
4 x 5/16"-18 x 1" Carriage Bolts
4 x 5/16"-18 Hex Nuts
4 x 5/16" Flat Washers
4 x 5/16" Split Lock Washers
4 x Rubber Caps
Minimum Height: 310mm (12.3")
Maximum Height: 388mm (15.3")
Round Plate: 63mm (2.5") Diameter
Lower Pole: 89mm x 89mm (3.5" x 3.5")
Powder Coated Marine Grade Aluminium & Powder Coated Steel
C Size 1.5" Rubber Ball
RAM Limited Lifetime Warranty
Warranty covers the mount or its components only. The mounted device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure.
This warranty is expressly limited to the persons in the United States, and all foreign countries who purchase RAM for resale or use in the ordinary course of the buyer's business.
This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.
In the unlikely situation that a RAM Mounts product fails due to a manufacturing defect, please contact us to arrange the approved return of the item at your cost.
We will evaluate the issue and either –
1. Repair the item and ship it back to you at our cost
2. Replace the item with an equivalent product and ship it back to you at our cost
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
|Unit Of Measure||ea|